Adhesives

Adhesives are an integral component of composite structures providing strength, shock absorption, protection against galvanic corrosion and improved damping characteristics of a mechanical system.

2-PART STRUCTURAL ADHESIVES

Structural acrylic adhesives provide a unique balance of high tensile shear and peel strength with maximum resistance to shock, stress and impact. They can generally be used with little or no surface preparation when bonding many metals and plastics either to themselves or to dissimilar materials. Resistant to saltwater, broad temperature ranges, fuels, acids, solvents, UV and humidity, these adhesives have simple, forgiving ratios and rapid room-temperature curing. Typical applications include general fabrication, coach building, roofing and cladding, boat building and GRP moulding.

403E/17 Methacrylate
FAST SET
LORD® 403E/17 is a general purpose, two-part, fast set, modified acrylic adhesive. Green in colour when cured and U.V. Stable. 403 adhesive has a #17 accelerator (ratio 10:1) and is available in 490ml and 420ml cartridges.
406E/17 Methacrylate
Medium Set
LORD® 406E/17 is a general purpose, two-part, medium set, modified acrylic adhesive. Green in colour when cured and U.V. Stable. 406 adhesive has a #17 accelerator (ratio 10:1) and is available in 490ml cartridges.
410/17 Methacrylate
Slow Set
LORD® 410/17 is a general purpose, two-part, slow set, modified acrylic adhesive. Green in colour when cured and U.V. Stable. 410 adhesive has a #17 accelerator (ratio 10:1) and is available in 490ml cartridges.
403E/19B Methacrylate
Fast Set
LORD® 403E/19B is a general purpose, two-part, fast set, modified acrylic adhesive, which is high temperature tolerant (i.e. powder coating safe). Black in colour when cured and U.V. Stable. 403 adhesive has a #19 accelerator (ratio 10:3) and is available in 50ml and 415ml cartridges.
406E/19B Methacrylate
Medium Set
LORD® 406E/19B is a general purpose, two-part, medium set, modified acrylic adhesive, which is high temperature tolerant (i.e. powder coating safe). Black in colour when cured and U.V. Stable. 406 adhesive has a #19 accelerator (ratio 10:3) and is available in 50ml and 415ml cartridges.
406E/19GB Methacrylate
Bondline Control
Lord Accelerator 19 GB contains 0.25mm high compression strength glass spheres which enable precise control of the bondline for where a consistent gap is required.

MS Polymers and Sealants

A range of MS Polymers and other sealants offering solutions to most bonding, sealing, waterproofing and joining applications. Often used in coach building, marine and industrial applications.

Soudaflex 40FC
HIGH ELASTICITY
High quality polyurethane sealant with very high elasticity, bonds well to most substrates and withstands water, acid rain, detergents, frost and heat. Available in packs of 12 310ml or 600ml cartridges in White, Grey, Black and Teak.
Soudaseal 240FC
JOINT SEALANT
High quality joint sealant with excellent adhesive strength. Available in packs of 12 290ml and 600ml cartridges in White, Grey and Black.
Soudaseal Fix-All High Tack
Joint Sealant
High quality joint sealant/adhesive, with outstanding initial grab that can be used for the direct bonding of almost any material on to vertical or horizontal surfaces. Available in packs of 12 290ml cartridges in White, Grey or Black.
Soudaseal Fix-All Crystal
Transparent Bonding
Crystal clear, neutral, elastic single component sealant/adhesive based on MS Polymer for transparent bonding in construction and building applications.
2-Part Polyurethane Adhesives
P.U.10 Clear -400

Contact Sprayable/Rollable Adhesives

A range of beadable, roller coating and sprayable adhesives, together with application equipment. Non-flammable spray adhesives have been formulated for the bonding of synthetic foams and insulation materials to a variety of substrates and these can be sprayed directly onto polystyrene without cell attack.

Axil 1435
Spray Application
A 40% solids, synthetic rubber adhesive in flammable solvents, designed for spray application. This adhesive is designed primarily for the insulation industry. Properties include high tack and long open time. This product is also suitable for expanded polystyrene without cell attack.
Axil 2854
Cure By Moisture
Offers exceptional levels of adhesion to a wide variety of substrates. Cures by reaction with moisture taken from the atmosphere or from the substrates being bonded.
Axil 1689
Spray Application
A 35% solids, synthetic rubber adhesive in non-flam solvents, designed for spray application. It has good tack and temperature resistance and is often used in the foam converting industry, office seating, bonding synthetic foams, timber and fabrics.

Applicator Equipment

We carry manual and pneumatic applicator guns to suit LORD® and Soudal adhesives.

Manual Gun (310)ml
Manual Gun (600)ml
VBM 200X Manual Gun - 400 m 1:1 cartidge
VBM 400X Manual Gun - 415/490ml 4:1 & 10:1 cartridge
VBA 200B Pneumatic Gun - 400ml cartridge 1:1
VBA 400A Pneumatic Gun - 415/490ml cartridge 4:1 & 10:1

Static Mixers

MFX 06-18 - 415ml/490ml cartridge
MFX10-18 - 415/490ml cartridge
MC10-24 - SA05/15/20 & 420ml cartridges
MC06-18 - SA05/15/20 & 420ml cartridges
MAH 04-17S - 50ml cartridges
MAQ 05-16L - PU Clear 10-50
MFQ08-24T - PU10-400
MCQ08-24T - PU10- Clear-400.